High VPD is costing you production

On a bright day, opening the vents as soon as the temperature rises dries the air and pushes VPD up. When VPD runs too high, your crop closes its stomata and photosynthesis slows down.

That happens at the moment light gives your crop the most potential to grow.

VPD is the difference in vapour pressure between the leaf and the air around it. It tells you how easily water leaves the leaf. A low VPD means humid air and little evaporation. A high VPD means dry air and a strong pull on the plant’s water.

Keeping VPD in the right band on bright days means more production, not more risk.

Below, we explain what happens in the leaf, which band to aim for, and which numbers to watch.

What happens in the leaf

Sunlight gives the leaf energy, and much of that energy goes into evaporating water. When the air around the leaf is dry and VPD is high, the plant loses water faster than it needs to. To protect itself, it partly closes its stomata.

The stomata are also where CO₂ enters the leaf. Partly closed stomata mean less CO₂ uptake and less photosynthesis. Less evaporation also means less cooling, so the leaf warms up and VPD rises further.

Plant Empowerment describes this as a negative spiral. Ventilating only on temperature dries the air, the stomata close, and even more ventilation is needed to keep the greenhouse cool. In its worked example, a greenhouse at 28°C needs about half the ventilation of one at 25°C (both at 75% RH) and loses about 10% less water. That is a calculation, not a field trial, but the physics behind it is sound.

Aim for the right band, not the lowest VPD

More humidity is not always better. When VPD drops too low, evaporation stalls. The plant takes up less calcium, growth gets soft and fungal diseases get a better chance.

Research and Plant Empowerment agree on the shape: a middle band is safe for most greenhouse crops. Measured in the air, that band is roughly 0.3–1.0 kPa. Below about 0.2–0.3 kPa, disease and calcium problems increase. Above about 1.5 kPa, stomata close and plants start to wilt.

The exact band shifts with crop, growth stage and light. Plant Empowerment gives 0.3–1.5 kPa at the leaf for most crops, with the higher end under strong radiation. So the VPD that is right at noon is not the VPD that is right at night.

Variation also matters. A VPD line that stays flat all day points to a climate that is too static. Plants grown in very constant, humid conditions can lose some of their ability to close their stomata when they need to.

What to watch on a sunny day

Air temperature and RH alone don’t tell you whether your crop is under stress. These signals do:

1

Leaf vs air temperature. Under rising light, a leaf can be warmer than the air for a while. If it stays warmer, the plant is short of water and its stomata are partly closed.

2

VPD at the leaf. According to Plant Empowerment, stomata are at least partly closed from about 1.5 kPa. Above 1.5–2 kPa the plant is losing control of its water balance.

3

The trend through the day. A VPD that climbs steadily after the vents open tells you the drying effect is outpacing the cooling.

One tip: always check which VPD a number refers to. Leaf VPD under strong sun is higher than air VPD, so the two can’t be compared one-to-one.

See it in your own greenhouse

High VPD is easy to miss if you only watch temperature and RH. 30MHz calculates VPD using plant temperature, not just air temperature. That way you see what the leaf actually experiences when the sun comes out and the vents open. Compare sunny days where you ventilated early with days where you kept humidity up, and see how your crop responded.

Want to learn what VPD insights can do for your operation? Book a free advice call. No strings attached.

Book a free advice call

Sign up to our newsletter

Join 3,000+ growers getting bi-weekly insights on precision monitoring, optimization, and data-driven growing.

Sign up for our monthly news letter

Get news and updates directly in your mailbox.